Solvay Udel P-1700 NT06 Polysulfone PSU Pellets

Udel P-1700 NT06 polysulfone (PSU) is a tough, rigid, high-strength thermoplastics suitable for continuous use up to 300°F (149°C). It is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.

These resins are also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity.

The resins comply with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, they are approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association.

Packing: 25kgs/bag

Colorable as following:

• Transparent: Udel P-1700 CL 2611 CMP

• Transparent: Udel P-1700 CL 2611 CMP MR

• Transparent: Udel P-1700 NT 06

• Transparent: Udel P-1700 NT 11

• Transparent: Udel P-1700 NT 11 MR

• Opaque Black : Udel P-1700 BK 937

• Opaque White: Udel P-1700 WH 6417

• Opaque White: Udel P-1700 WH 7407

• Opaque Gray: Udel P-1700 GY 8057

Udel PSU – Rigid, high-strength, semi-tough, transparent plastic that offers higher heat resistance and better hydrolytic stability than polycarbonate (PC). It retains its good mechanical properties when exposed to steam and other sterilization techniques.

Sulfone Polymers Overview

Sulfone polymers are high-heat plastics with a clear advantage. These amorphous thermoplastics offer more toughness, strength and hydrolytic stability than other transparent plastics.

Sulfone polymers are high-heat plastics with a clear advantage. These amorphous thermoplastics offer more toughness, strength and hydrolytic stability than other transparent plastics. They withstand prolonged exposure to water, chemicals and temperatures – handling a broad range of end-use temperatures from -40°C to 204°C (-40°F to 400°F).